截斷車削
NPA 34/2018
新的超長型SWISSCUT刀片
焦點
-
截斷直徑達20毫米
-
車刀深度達5.0毫米
-
可從刀具兩側鎖定刀片夾緊螺釘
-
無需拆下刀片式夾緊螺釘即可進行分度
ISCAR推出了新的SWISSCUT XL系列,具有高達10 mm的切槽深度能力。
與現有的SWISSCUT INNOVAL生產線相比,新生產線可實現更深的加工。
|
SCIR 41
(SWISSCUT XL) |
SCIR 22
(SWISSCUT INNOVAL) |
截斷 (直徑) |
20 mm |
14 mm |
背車
(最大切深) |
5.0 mm |
5.0 mm |
主要特色:
• 2個夾緊螺釘提供非常強大的夾緊和穩定性
• 可從刀具兩側鎖定刀片夾緊螺釘(競爭對手僅為每個夾緊方向提供分開的刀具/刀片)
• 無需拆下刀片式夾緊螺釘即可進行分度
• 前刀片提取/插入,可以在機器上對刀片進行分度,同時保持刀具的最小懸伸
• 精細的刀具設計,沒有突出元件,可以通過瑞士型機床的約束槽,插入至刀具
即使第一個使用過的切削刃完全斷裂,超出切削區域的止動平面也能夠使用刀片的第二切削刃
刀具和刀片選擇
刀具有12和16 mm方形刀柄。刀片可用於以下應用:
-
截斷
-
Back Turning
-
Front Turning
-
Groove-Turn
-
Threading
Inserts are available in Grade IC1008.
User Guide
-
Always prefer the 16 mm shank if the machine can accommodate it
-
Always work with the minimum overhang of the tool from the gang, each mm less in the overhang
will improve performance
-
Take care to use the correct screwdriver blade according to the clamping side
SCHR/L-41BF
Grooving and Turning Tools with Back and Front Clamping for Swiss-Type and Automatic Machines
(1) Maximum cutting width
(2) See insert data
SCIR/L-41-R/L
Parting Inserts
(1) Cutting edge below center
SCIR/L-41-BRA/BLA
Back Turning Inserts
(1) Cutting edge below center
SCIR/L-41-ERA/ELA
Back Turning Inserts for Short Chipping Materials
(1) Cutting edge below center
SCIR/L-41-AD
Turning Inserts
1) Cutting edge below center
SCIR/L-41-AR/AL
Turning Inserts with a Frontal Relief Angle
1) Cutting edge below center
SCIR/L-41-NP
Grooving, Turning and Parting Inserts
• When turning to the opposite side of chipformer, maximum D.O.C. is 0.5 mm
(1) Cutting edge below center
SCIR/L-41-MTR/MTL
Threading Inserts with a 60° Partial Profile
(1) Thread pitch minimum (mm)
(2) Thread pitch maximum (mm)
(3) Threads per inch maximum
(4) Threads per inch minimum
(5) Cutting edge below center
The NPA34-2018's pdf file:
View (PDF)
or
Download (ZIP)