SWISSCUT系列產品再升級



  • 同一刀具與刀片皆可使用正面與背面鎖固方式
  • 減少50%刀具庫存
  • 更換刀片無須完全卸下螺絲
伊斯卡把SWISSCUT產品再升級改良. 此新型刀片具有創新的橢圓形螺絲孔,且具有兩大重要特色. 在現有產品線中,正面與背面鎖固不同方向,使用不同的刀具及刀片. 此種新型的設計,採用特殊的螺絲設計,可以同時使用於兩面鎖緊. 在現有的系統中,更換刀片需完全卸下螺絲,而且螺絲很小,很容易遺失或掉落. 新的改良式系統,更換刀片無須完全取下螺絲,因此沒有螺絲遺失的風險,更換刀片也更快速.
The new clamping design uses a special screw that can be accessed and operated from both tool sides. The screw has to be fully removed for insert indexing. As the clamping screw is small, it can easily fall and disappear inside the machine or on the floor. In the upgraded line, the insert can be indexed without the need to fully remove the screw. Therefore, there is no risk of falling parts and indexing is easier and faster.

UPGRADE
TURNING
GROOVING TURN
THREADING
BACK TURNING
PARTING


Rake Angle (Kr°) Selection Guide

  Brass Ledloy Steel St. Steel Titanium Aluminum
           
           
15°            

For brittle workpieces and small diameters always prefer Kr=0°

Frontal width selection guide
  • Small diameter and brittle workpiece: small W (less radial force)
  • Large diameters: larger W (stronger cutting edge)

  rake angle (Kr)
   
frontal width (W)  



Turning Insert Selection Process